What is window flashing?

What is it? Why does it matter? And where can you learn more?

9. May 2019 5 minutes reading time

Like many things in our collective memory, windows aren’t as simple as they used to be, which means window flashing, too, has reached a whole new level of complicated.

window flashing

In the 1940s you couldn’t really bling out your window flashing (let alone choose a specific brand of house wrap).

Case in point – there are 4 different flashing standards prescribed by the American Architectural Manufacturer’s Association (AAMA). That’s not factoring in the dozens of window flashing manufacturers with unique interpretations of those methods.

And that’s just for residential flanged windows. Combined with the hundreds of window producers and overlaid by some actively-advancing energy codes: the number of possible window flashing variations for each project is boggling. 

So how do you as an installer Window flashing comprises the bulk-water diversion steps of the window installation process.  Simply put – it is the connection between window and wall.  make good decisions in the field? Remember a couple fundamental building envelope truths:

  • Water runs downhill
  • Windows will leak*

*exception for windows produced in Switzerland ????

 What is flashing?

Any durable material that is installed to divert bulk water away from sensitive areas is a flashing. 

Flashings are used in many different exterior trades. As a result, you’ll primarily see them in roofing and siding– and they generally operate within 2 distinct layers of the building assembly:

1) Primary water shedding surface (cladding)

roof flashing

Roof valley flashing image courtesy of vistainspireprogram.com

2) Secondary drainage plane (weather-resistive barrier)

The SIGA Majvest® 500 SA is acting as the weather barrier

The SIGA Majvest® 500 SA is acting as the weather barrier

Depending on which layer of the wall they’re in, flashings can take on a number of forms to repel water:

  • Sheet metal (stainless steel, galvanized steel, copper)
  • Tapes or self-adhered membranes
  • Flexible non-adhered sheets
  • Gunnable liquids

What is window flashing?

Window flashing comprises the bulk-water diversion steps of the window installation process.  Simply put – it is the connection between window and wall.  

In terms of the definition stated above, window flashing is the bridge between the secondary drainage plane (weather resistive barrier) to the primary water shedding surface (the window). 

Why are windows special?

Windows all start as a really big hole in the wall (often called a fenestration).

Even though we fill the hole with arguably the most sophisticated building component there is (a window), the hole itself presents an inherent vulnerability.

Windows also command special attention because they are 3-dimensional. It’s much simpler to manage the flow of water (straight down) in the area of the [flat] wall plane. 

Like Smaug’s missing scale in The Hobbit– it only takes one pinhole for water to fell the beast. 

However, reach the window, and bulk water is on a downward path and is diverted out/in/around/along any number of directions. 

Thankfully the path water takes is predictable.  With a little building physics know-how, the right products, and the correct installation, you can mitigate water penetration risk. 

Today we design buildings with a backstop: a secondary drainage plane and associated flashings work to reduce the risk of water penetration.

A quick run-down on the two primary steps of window flashing

The process of flashing a window is broken into two main parts:

  1. Pre-flashing of the rough opening (hole in the wall) before the window goes in,
  2. Counter-flashing the installed window

Like fish scales, each part must nest underneath the previous one.  Layering from bottom-to-top is called water-shedding or weather-lapping fashion.

What is pre-flashing the rough opening?

“Pre-flashing” is an extension of what is historically known as a sill-pan: a custom, soldered piece of brake-formed metal installed at the bottom of the rough opening. 

Metal pans are still around, but the more common practice is to choose a self-adhered material to flash the sill – Wigluv® is a high-quality tape option here. Better-than code-minimum installations won’t stop at the sill but rather seal the entire perimeter of the rough opening.

Pre-flashing in this way helps to integrate the secondary drainage plane (weather-resistive barrier) with the opening. And when (not if) the window itself leaks, your horizontal wood or metal sill is protected. 

TIP: How to help window flashing perform better

Providing a drainage path at the sill when setting the window can help the window flashing to perform better.

  • All windows can be installed on setting blocks, which provides and air space at the sill.  (Make sure they are structurally sound and spaced properly.) 
  • Flanged windows also benefit from a few 1/16” horseshoe shims behind the sill flange, for the same reason.

What is counter flashing the window?

After the window is installed, another layer of self-adhered material is installed to the sides (jambs) and top (head) of the window.

The main goal of this flashing is to divert any moisture over and past the window. It is also designed to offer additional water resistance behind the window-to-siding or trim joints, and to offer an additional seal to window flange fasteners. 

All put together, it looks something like this:

Conclusion

Window flashing is a critical piece of every window installation and the benefits of waterproofing properly are felt for decades afterwards. You’ve only got one shot at it, unless you prefer callbacks.

The window flashing steps mentioned above are very general steps for installing a window —it’s likely that your project is even more complex than code minimum.

Lean on your architects, consultants and manufacturers alike to make sure you are choosing the right methods and materials for the job at hand. SIGA has already done a the work of developing best practices for complex windows, and our website has a wealth of knowledge to help you configure your projects with high-quality SIGA flashing tapes.

Get some regular inspo for your building’s hidden armor by signing up for our monthly email, the Build it Better eNewsletter.

Similar articles

Jessica Kumor in airtightness

Air Barriers | Google Auto Suggest Building Science Edition (Video)

Jessica Kumor in airtightness , weather barrier

Top 6 rookie air sealing mistakes

Jessica Kumor in airtightness , weather barrier

Advancements in window technology: Interview with Mike Cairns

Jessica Kumor in culture , sustainability

Ice Box Challenge: Standard code vs Passive House design

Jessica Kumor in airtightness , sustainability

How to air seal exterior wire penetrations

Jessica Kumor in culture , products , sustainability

SIGA wins Hygrobrid® technology patent challenge

Top 10 common air barrier questions

Jessica Kumor in airtightness , weather barrier

Do you need to know what a perm rating is?

Jessica Kumor in airtightness , weather barrier

Air Barrier placement: How different is America from Europe?

Jessica Kumor in airtightness

High-performance construction trends 2020 you should know